Skip to content
  • Shop
    • Shelving System
    • Furniture
    • Lighting
    • Design Items
    • Spare Parts
    • New releases
    • All Products
  • About
  • The Philosophy of Less
    Cart
    Free Shippingon orders over 500 DKK / €150 / £130
    5-Year Warranty& spare parts always available

    Currency

    • DKK kr.
    • EUR €
    • GBP £
    moebe.dk moebe.dk moebe.dk moebe.dk
    • Shop
      Shelving System
      Furniture
      Lighting
      Design Items
      Spare Parts
      New releases
      All Products
    • About
    • The Philosophy of Less
    Search Cart


    Categories
      • Shelving System
        • Floor Standing
        • Wall Mounted
        • Magazine Shelving
        • Build your own
        • Book a free design meeting
        • How does it work
        • Gallery
        • Assembly Instructions
        • Care & FAQ guide
        • Extra Parts
      • Furniture
        • Lighting
          • Design Items
            • Spare Parts
              • New Releases
                • All Products
                    • Shelving System
                      • Floor Standing
                      • Wall Mounted
                      • Magazine Shelving
                      • Build your own
                      • Book a free design meeting
                      • How does it work
                      • Gallery
                      • Assembly Instructions
                      • Care & FAQ guide
                      • Extra Parts
                    • Furniture
                      • Lighting
                        • Design Items
                          • Spare Parts
                            • New Releases
                              • All Products
                                Gallery Shelf
                                from €99
                                Oak Black
                                Papercut Artworks
                                from €29
                                White
                                Shelving System – Floor standing
                                from €538
                                Oak/Black Oak/White Oak/Deep-Blue Oak/Pine-Green Oak/Warm-Grey Black White Smoked-Oak/Black Smoked-Oak/White Smoked-Oak/Deep-Blue Smoked-Oak/Pine-Green Smoked-Oak/Warm-Grey
                                Wall Mirror
                                from €99
                                Brass Black Chrome White
                                Sold Out
                                The MOEBE Shelving System
                                from €538
                                Oak/Black Oak/White Oak/Deep-Blue Oak/Pine-Green Oak/Warm-Grey Black White Smoked-Oak/Black Smoked-Oak/White Smoked-Oak/Deep-Blue Smoked-Oak/Pine-Green Smoked-Oak/Warm-Grey

                                Company

                                • About Us
                                • Sustainability
                                • Contact
                                • Jobs
                                • Stories

                                Find Us

                                • Retailers

                                Customer Care

                                • Shipping, Delivery & Returns
                                • 5 Year Warranty
                                • Terms & Conditions
                                • Privacy Policy

                                Professionals

                                • Catalogue
                                • Press & Resources
                                • Become a Retailer

                                Join Us



                                MOEBE
                                Strandlodsvej 42a, 1
                                DK-2300 Copenhagen S

                                CVR: DK 36072105

                                FSC®C132484

                                Only products identified as such on this website are FSC certified



                                Currency

                                • DKK kr.
                                • EUR €
                                • GBP £
                                • American Express
                                • Apple Pay
                                • Google Pay
                                • Maestro
                                • Mastercard
                                • PayPal
                                • Shop Pay
                                • Union Pay
                                • Visa


                                © 2023 MOEBE

                                CARE AND FAQ


                                How deep are the shelves?

                                The shelves are 17.5 cm deep. 


                                Is it glued or screwed?

                                No, it is just held by the wedges.


                                Do I need to fix it to a wall?

                                Yes. Wall Shelving System comes included with fixing brackets. These should be installed at the top, bottom and at every leg interval.  


                                How do I know that the shelf is straight?

                                By using a water level, a water level app or measuring the distance between the shelves.


                                How much weight can it stand? 

                                We do not recommend more than 10 kg on each shelf.


                                Does the wood change colour? 

                                Direct sunlight will cause the colour of wood to change, even if it is stained or lacquered. This will be particularly apparent if the furniture is placed under eg. a window. Oak will tend to darken in this situation. 


                                What are the shelves made of?

                                The wedges are made from solid oak and the shelves are made from an MDF core with either an oiled or black-stained oak finish or a white PU paint.


                                Where is it produced?

                                In Lithuania.


                                How high and wide can it be built?

                                You can build the system as high and wide as you like. There are no limitations.


                                What colours does it come in?

                                Shelves - Oiled oak Veneer / Black stained  oak veneer / White PU paint

                                Legs - Powder coated in black or white


                                What if I lose a part?

                                If you lose a part, e.g. a wedge, you can always get hold of our replacement part from the spare parts section of our website.


                                How do I remove stains from e.g. a cup?

                                Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterward.


                                How do I clean the Shelving System?

                                Dust can be removed with damp cloth.


                                How do I remove dry patches on the surface?

                                Apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Do not use oils sold for cooking or eating.


                                ​

                                TAKE CARE OF YOUR SHELVING SYSTEM


                                When unwrapped it might take 2–3 days for the protective oil to completely dry. Be careful to protect clothing and other materials that can soak up oil during this time.


                                If at any time the wood displays lighter dry patches, we recommend you apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Small cans of pigment free furniture oil are available from most DIY or hardware stores. Do not use oils sold for cooking or eating.


                                Any spills must be removed immediately using a cloth. Dust can be removed with damp a cloth. Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterwards.


                                 If you don't find what you are looking for, don't hesitate to send us an email: info@moebe.dk

                                CARE AND FAQ


                                How deep are the shelves?

                                The shelves are 17.5 cm deep. 


                                Is it glued or screwed?

                                No, it is just held by the wedges.


                                Do I need to fix it to a wall?

                                Yes. Wall Shelving System comes included with fixing brackets. These should be installed at the top, bottom and at every leg interval.  


                                How do I know that the shelf is straight?

                                By using a water level, a water level app or measuring the distance between the shelves.


                                How much weight can it stand? 

                                We do not recommend more than 10 kg on each shelf.


                                Does the wood change colour? 

                                Direct sunlight will cause the colour of wood to change, even if it is stained or lacquered. This will be particularly apparent if the furniture is placed under eg. a window. Oak will tend to darken in this situation. 


                                What are the shelves made of?

                                The wedges are made from solid oak and the shelves are made from an MDF core with either an oiled or black-stained oak finish or a white PU paint.


                                Where is it produced?

                                In Lithuania.


                                How high and wide can it be built?

                                You can build the system as high and wide as you like. There are no limitations.


                                What colours does it come in?

                                Shelves - Oiled oak Veneer / Black stained  oak veneer / White PU paint

                                Legs - Powder coated in black or white


                                What if I lose a part?

                                If you lose a part, e.g. a wedge, you can always get hold of our replacement part from the spare parts section of our website.


                                How do I remove stains from e.g. a cup?

                                Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterward.


                                How do I clean the Shelving System?

                                Dust can be removed with damp cloth.


                                How do I remove dry patches on the surface?

                                Apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Do not use oils sold for cooking or eating.


                                ​

                                TAKE CARE OF YOUR SHELVING SYSTEM


                                When unwrapped it might take 2–3 days for the protective oil to completely dry. Be careful to protect clothing and other materials that can soak up oil during this time.


                                If at any time the wood displays lighter dry patches, we recommend you apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Small cans of pigment free furniture oil are available from most DIY or hardware stores. Do not use oils sold for cooking or eating.


                                Any spills must be removed immediately using a cloth. Dust can be removed with damp a cloth. Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterwards.


                                 If you don't find what you are looking for, don't hesitate to send us an email: info@moebe.dk

                                CARE AND FAQ


                                How deep are the shelves?

                                The shelves are 17.5 cm deep. 


                                Is it glued or screwed?

                                No, it is just held by the wedges.


                                Do I need to fix it to a wall?

                                Yes. Wall Shelving System comes included with fixing brackets. These should be installed at the top, bottom and at every leg interval.  


                                How do I know that the shelf is straight?

                                By using a water level, a water level app or measuring the distance between the shelves.


                                How much weight can it stand? 

                                We do not recommend more than 10 kg on each shelf.


                                Does the wood change colour? 

                                Direct sunlight will cause the colour of wood to change, even if it is stained or lacquered. This will be particularly apparent if the furniture is placed under eg. a window. Oak will tend to darken in this situation. 


                                What are the shelves made of?

                                The wedges are made from solid oak and the shelves are made from an MDF core with either an oiled or black-stained oak finish or a white PU paint.


                                Where is it produced?

                                In Lithuania.


                                How high and wide can it be built?

                                You can build the system as high and wide as you like. There are no limitations.


                                What colours does it come in?

                                Shelves - Oiled oak Veneer / Black stained  oak veneer / White PU paint

                                Legs - Powder coated in black or white


                                What if I lose a part?

                                If you lose a part, e.g. a wedge, you can always get hold of our replacement part from the spare parts section of our website.


                                How do I remove stains from e.g. a cup?

                                Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterward.


                                How do I clean the Shelving System?

                                Dust can be removed with damp cloth.


                                How do I remove dry patches on the surface?

                                Apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Do not use oils sold for cooking or eating.


                                ​

                                TAKE CARE OF YOUR SHELVING SYSTEM


                                When unwrapped it might take 2–3 days for the protective oil to completely dry. Be careful to protect clothing and other materials that can soak up oil during this time.


                                If at any time the wood displays lighter dry patches, we recommend you apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Small cans of pigment free furniture oil are available from most DIY or hardware stores. Do not use oils sold for cooking or eating.


                                Any spills must be removed immediately using a cloth. Dust can be removed with damp a cloth. Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterwards.


                                 If you don't find what you are looking for, don't hesitate to send us an email: info@moebe.dk

                                CARE AND FAQ


                                How deep are the shelves?

                                The shelves are 35 cm deep. 


                                Is it glued or screwed?

                                No, it is just held by the wedges.


                                Do I need to fix it to a wall?

                                We do not recommend to use the Shelving System without securing it to the wall. If doing so please beware that it is your responsibility to make sure, that it is constructed so it will not fall over. 


                                How do I know when it's straight?

                                By using a water level, a water level app or measuring the distance between the shelves.


                                How much weight can it stand? 

                                We do not recommend more than 20 kg on each shelf. If you have a backplate below the shelf the recommended limit is 30 kg. 


                                Does the wood change colour? 

                                Direct sunlight will cause the colour of real wood to change, even if it is stained or lacquered. This will be particularly apparent if the furniture is placed under eg. a window. Oak will tend to darken in this situation. 


                                Can I buy different parts?

                                Yes, you can buy all parts separately and design your shelving system how ever you like.


                                What are the shelves made of?

                                The wedges are made from solid oak and the shelves are made from an MDF core with either an oiled or black-stained oak finish or a white PU paint.


                                Where is it produced?

                                In Lithuania.


                                How high and wide can it be built?

                                You can build the system as high and wide as you like. There are no limitations.


                                What colours does it come in?

                                Shelves - Oiled oak Veneer / Black stained  oak veneer / White PU paint

                                Legs - Powder coated in black or white


                                What if I lose a part?

                                If you lose a part, e.g. a wedge, you can always email us to get a new specific part.


                                How do I remove stains from e.g. a cup?

                                Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterward.


                                How do I clean the Shelving System?

                                Dust can be removed with damp cloth.


                                How do I remove dry patches on the surface?

                                Apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Do not use oils sold for cooking or eating.


                                ​

                                TAKE CARE OF YOUR SHELVING SYSTEM


                                When unwrapped it might take 2–3 days for the protective oil to completely dry. Be careful to protect clothing and other materials that can soak up oil during this time.


                                If at any time the wood displays lighter dry patches, we recommend you apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Small cans of pigment free furniture oil are available from most DIY or hardware stores. Do not use oils sold for cooking or eating.


                                Any spills must be removed immediately using a cloth. Dust can be removed with damp a cloth. Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterwards.


                                 If you don't find what you are looking for, don't hesitate to send us an email: info@moebe.dk

                                CARE AND FAQ


                                How deep are the shelves?

                                The shelves are 35 cm deep. 


                                Is it glued or screwed?

                                No, it is just held by the wedges.


                                Do I need to fix it to a wall?

                                We do not recommend to use the Shelving System without securing it to the wall. If doing so please beware that it is your responsibility to make sure, that it is constructed so it will not fall over. 


                                How do I know when it's straight?

                                By using a water level, a water level app or measuring the distance between the shelves.


                                How much weight can it stand? 

                                We do not recommend more than 20 kg on each shelf. If you have a backplate below the shelf the recommended limit is 30 kg. 


                                Does the wood change colour? 

                                Direct sunlight will cause the colour of real wood to change, even if it is stained or lacquered. This will be particularly apparent if the furniture is placed under eg. a window. Oak will tend to darken in this situation. 


                                Can I buy different parts?

                                Yes, you can buy all parts separately and design your shelving system how ever you like.


                                What are the shelves made of?

                                The wedges are made from solid oak and the shelves are made from an MDF core with either an oiled or black-stained oak finish or a white PU paint.


                                Where is it produced?

                                In Lithuania.


                                How high and wide can it be built?

                                You can build the system as high and wide as you like. There are no limitations.


                                What colours does it come in?

                                Shelves - Oiled oak Veneer / Black stained  oak veneer / White PU paint

                                Legs - Powder coated in black or white


                                What if I lose a part?

                                If you lose a part, e.g. a wedge, you can always email us to get a new specific part.


                                How do I remove stains from e.g. a cup?

                                Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterward.


                                How do I clean the Shelving System?

                                Dust can be removed with damp cloth.


                                How do I remove dry patches on the surface?

                                Apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Do not use oils sold for cooking or eating.


                                ​

                                TAKE CARE OF YOUR SHELVING SYSTEM


                                When unwrapped it might take 2–3 days for the protective oil to completely dry. Be careful to protect clothing and other materials that can soak up oil during this time.


                                If at any time the wood displays lighter dry patches, we recommend you apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Small cans of pigment free furniture oil are available from most DIY or hardware stores. Do not use oils sold for cooking or eating.


                                Any spills must be removed immediately using a cloth. Dust can be removed with damp a cloth. Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterwards.


                                 If you don't find what you are looking for, don't hesitate to send us an email: info@moebe.dk

                                CARE AND FAQ


                                How deep are the shelves?

                                The shelves are 35 cm deep. 


                                Is it glued or screwed?

                                No, it is just held by the wedges.


                                Do I need to fix it to a wall?

                                We do not recommend to use the Shelving System without securing it to the wall. If doing so please beware that it is your responsibility to make sure, that it is constructed so it will not fall over. 


                                How do I know when it's straight?

                                By using a water level, a water level app or measuring the distance between the shelves.


                                How much weight can it stand? 

                                We do not recommend more than 20 kg on each shelf. If you have a backplate below the shelf the recommended limit is 30 kg. 


                                Does the wood change colour? 

                                Direct sunlight will cause the colour of real wood to change, even if it is stained or lacquered. This will be particularly apparent if the furniture is placed under eg. a window. Oak will tend to darken in this situation. 


                                Can I buy different parts?

                                Yes, you can buy all parts separately and design your shelving system how ever you like.


                                What are the shelves made of?

                                The wedges are made from solid oak and the shelves are made from an MDF core with either an oiled or black-stained oak finish or a white PU paint.


                                Where is it produced?

                                In Lithuania.


                                How high and wide can it be built?

                                You can build the system as high and wide as you like. There are no limitations.


                                What colours does it come in?

                                Shelves - Oiled oak Veneer / Black stained  oak veneer / White PU paint

                                Legs - Powder coated in black or white


                                What if I lose a part?

                                If you lose a part, e.g. a wedge, you can always email us to get a new specific part.


                                How do I remove stains from e.g. a cup?

                                Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterward.


                                How do I clean the Shelving System?

                                Dust can be removed with damp cloth.


                                How do I remove dry patches on the surface?

                                Apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Do not use oils sold for cooking or eating.


                                ​

                                TAKE CARE OF YOUR SHELVING SYSTEM


                                When unwrapped it might take 2–3 days for the protective oil to completely dry. Be careful to protect clothing and other materials that can soak up oil during this time.


                                If at any time the wood displays lighter dry patches, we recommend you apply a thin coat of oil to the furniture with a clean lint-free cloth to nourish the wood. Small cans of pigment free furniture oil are available from most DIY or hardware stores. Do not use oils sold for cooking or eating.


                                Any spills must be removed immediately using a cloth. Dust can be removed with damp a cloth. Light stains may be removed by gently rubbing in the direction of the grain with 400 grit (very fine) sandpaper and re-oiling afterwards.


                                 If you don't find what you are looking for, don't hesitate to send us an email: info@moebe.dk

                                How to delete a part

                                 

                                1. Select the part that you want to remove by clicking on it.

                                ​

                                2. Once selected. Click on the recycle bin image located at the bottom right of the model screen.  The part should now be removed.

                                How to delete a part

                                 

                                1. Select the part that you want to remove by clicking on it.

                                ​

                                2. Once selected. Click on the recycle bin image located at the bottom right of the model screen.  The part should now be removed.

                                How to delete a part

                                 

                                1. Select the part that you want to remove by clicking on it.

                                ​

                                2. Once selected. Click on the recycle bin image located at the bottom right of the model screen.  The part should now be removed.

                                How to delete a part

                                 

                                1. Select the part that you want to remove by clicking on it.

                                ​

                                2. Once selected. Click on the recycle bin image located at the bottom right of the model screen.  The part should now be removed.

                                How to delete a part

                                 

                                1. Select the part that you want to remove by clicking on it.

                                ​

                                2. Once selected. Click on the recycle bin image located at the bottom right of the model screen.  The part should now be removed.

                                How to delete a part

                                 

                                1. Select the part that you want to remove by clicking on it.

                                ​

                                2. Once selected. Click on the recycle bin image located at the bottom right of the model screen.  The part should now be removed.

                                How to rotate a bay

                                 

                                Bays can only be rotated  when adding a new bay to the system.  Select a ''corner extension '' right or left. 

                                 

                                How to rotate a bay

                                 

                                Bays can only be rotated  when adding a new bay to the system.  Select a ''corner extension '' right or left. 

                                 

                                How to rotate a bay

                                 

                                Bays can only be rotated  when adding a new bay to the system.  Select a ''corner extension '' right or left. 

                                 

                                How to share your system

                                 

                                1. First. Click on the Share button located at the top right of the modelling space.  The symbol looks like this: 

                                Share-Symbol.png

                                 

                                2. In the sharing dialogue box. Copy the share link and keep this somewhere safe.  Your design can be accessed by anyone who has the share link. 

                                 

                                How to share your system

                                 

                                1. First. Click on the Share button located at the top right of the modelling space.  The symbol looks like this: 

                                Share-Symbol.png

                                 

                                2. In the sharing dialogue box. Copy the share link and keep this somewhere safe.  Your design can be accessed by anyone who has the share link. 

                                 

                                How to share your system

                                 

                                1. First. Click on the Share button located at the top right of the modelling space.  The symbol looks like this: 

                                Share-Symbol.png

                                 

                                2. In the sharing dialogue box. Copy the share link and keep this somewhere safe.  Your design can be accessed by anyone who has the share link. 

                                 

                                How to print your system to a PDF

                                ​

                                1. First. Click on the price button, located at the bottom of your model. 

                                 

                                2. In the newly opened dialogue box, locate the print button at the bottom left-hand side, and click once. 

                                ​

                                3. In the print dialogue box, select ''PDF'' as your printer type  

                                ​

                                Don't have a pdf printer? How to install: 

                                ​

                                Windows

                                https://www.youtube.com/watch?v=qe34HJpXdEg

                                ​

                                Mac

                                https://www.digitaltrends.com/computing/how-to-print-pdf-on-a-mac/

                                 

                                How to print your system to a PDF

                                ​

                                1. First. Click on the price button, located at the bottom of your model. 

                                 

                                2. In the newly opened dialogue box, locate the print button at the bottom left-hand side, and click once. 

                                ​

                                3. In the print dialogue box, select ''PDF'' as your printer type  

                                ​

                                Don't have a pdf printer? How to install: 

                                ​

                                Windows

                                https://www.youtube.com/watch?v=qe34HJpXdEg

                                ​

                                Mac

                                https://www.digitaltrends.com/computing/how-to-print-pdf-on-a-mac/

                                 

                                How to print your system to a PDF

                                ​

                                1. First. Click on the price button, located at the bottom of your model. 

                                 

                                2. In the newly opened dialogue box, locate the print button at the bottom left-hand side, and click once. 

                                ​

                                3. In the print dialogue box, select ''PDF'' as your printer type  

                                ​

                                Don't have a pdf printer? How to install: 

                                ​

                                Windows

                                https://www.youtube.com/watch?v=qe34HJpXdEg

                                ​

                                Mac

                                https://www.digitaltrends.com/computing/how-to-print-pdf-on-a-mac/

                                 

                                Change the colour / finish

                                 

                                Entire system

                                1. Ensure that nothing in the model is selected.

                                 

                                2. On the right-hand side, under ''material''  choose and click once on either the oak or black finish. 

                                ​

                                ​

                                Individual part

                                1. Select the part you wish to change.

                                ​

                                2. On the right-hand side, under ''material''  choose and click once on either the oak or black finish. 

                                Change the colour / finish

                                 

                                Entire system

                                1. Ensure that nothing in the model is selected.

                                 

                                2. On the right-hand side, under ''material''  choose and click once on either the oak or black finish. 

                                ​

                                ​

                                Individual part

                                1. Select the part you wish to change.

                                ​

                                2. On the right-hand side, under ''material''  choose and click once on either the oak or black finish. 

                                Change the colour / finish

                                 

                                Entire system

                                1. Ensure that nothing in the model is selected.

                                 

                                2. On the right-hand side, under ''material''  choose and click once on either the oak or black finish. 

                                ​

                                ​

                                Individual part

                                1. Select the part you wish to change.

                                ​

                                2. On the right-hand side, under ''material''  choose and click once on either the oak or black finish. 

                                Add a clothes bar

                                 

                                1. First, click the ''add on'' button in the modelling space.

                                ​

                                2. To the right-hand side will appear a list of add on's available.  Scroll to or click on the ''shelf elements'' section and locate the clothes bar.

                                ​

                                3. Click once on the clothes bar to select it. Then, choose one of the newly highlighted shelves within the modelling space to attach the clothes bar. Click once on the location to set the clothes bar in place.

                                Add a clothes bar

                                 

                                1. First, click the ''add on'' button in the modelling space.

                                ​

                                2. To the right-hand side will appear a list of add on's available.  Scroll to or click on the ''shelf elements'' section and locate the clothes bar.

                                ​

                                3. Click once on the clothes bar to select it. Then, choose one of the newly highlighted shelves within the modelling space to attach the clothes bar. Click once on the location to set the clothes bar in place.

                                Add a clothes bar

                                 

                                1. First, click the ''add on'' button in the modelling space.

                                ​

                                2. To the right-hand side will appear a list of add on's available.  Scroll to or click on the ''shelf elements'' section and locate the clothes bar.

                                ​

                                3. Click once on the clothes bar to select it. Then, choose one of the newly highlighted shelves within the modelling space to attach the clothes bar. Click once on the location to set the clothes bar in place.

                                Add an Element

                                 

                                1. First, click the ''Add an element'' button in the modelling space.

                                ​

                                2. To the right-hand side will appear a list of add on's available. Classified under Shelves, Cabinet and Other.

                                ​

                                3. Click once on the element to select it. Then, choose one of the newly highlighted locations within the modelling space and click on the location to place the element into your model.

                                Add an Element

                                 

                                1. First, click the ''Add an element'' button in the modelling space.

                                ​

                                2. To the right-hand side will appear a list of add on's available. Classified under Shelves, Cabinet and Other.

                                ​

                                3. Click once on the element to select it. Then, choose one of the newly highlighted locations within the modelling space and click on the location to place the element into your model.

                                Add an Element

                                 

                                1. First, click the ''Add an element'' button in the modelling space.

                                ​

                                2. To the right-hand side will appear a list of add on's available. Classified under Shelves, Cabinet and Other.

                                ​

                                3. Click once on the element to select it. Then, choose one of the newly highlighted locations within the modelling space and click on the location to place the element into your model.

                                Change the height of a bay

                                 

                                1. The height of each bay is controlled individually. 

                                ​

                                2. First. Click on one of the legs of the bay you wish to change, to the right-hand side will appear a slider.


                                3, Adjust the slider left or right to adjust the height. If the height you select is not possible the slider will auto adjust to the nearest possible height. 

                                ​

                                Legs for the shelving system are available in 65cm, 85cm and 115cm in length. Available configurator heights are based on the possible combinations of these three lengths.

                                Change the height of a bay

                                 

                                1. The height of each bay is controlled individually. 

                                ​

                                2. First. Click on one of the legs of the bay you wish to change, to the right-hand side will appear a slider.


                                3, Adjust the slider left or right to adjust the height. If the height you select is not possible the slider will auto adjust to the nearest possible height. 

                                ​

                                Legs for the shelving system are available in 65cm, 85cm and 115cm in length. Available configurator heights are based on the possible combinations of these three lengths.

                                Change the height of a bay

                                 

                                1. The height of each bay is controlled individually. 

                                ​

                                2. First. Click on one of the legs of the bay you wish to change, to the right-hand side will appear a slider.


                                3, Adjust the slider left or right to adjust the height. If the height you select is not possible the slider will auto adjust to the nearest possible height. 

                                ​

                                Legs for the shelving system are available in 65cm, 85cm and 115cm in length. Available configurator heights are based on the possible combinations of these three lengths.

                                Add a new bay

                                ​

                                1. First, click the ''Add an element'' button in the modelling space. 

                                ​

                                2. To the right-hand side will appear a list of add on's available. Locate the ''Extensions'' section and select the type of bay that you want to use.

                                ​

                                New bays can be added at a 90° angle, linear or in parallel.

                                Add a new bay

                                ​

                                1. First, click the ''Add an element'' button in the modelling space. 

                                ​

                                2. To the right-hand side will appear a list of add on's available. Locate the ''Extensions'' section and select the type of bay that you want to use.

                                ​

                                New bays can be added at a 90° angle, linear or in parallel.

                                Add a new bay

                                ​

                                1. First, click the ''Add an element'' button in the modelling space. 

                                ​

                                2. To the right-hand side will appear a list of add on's available. Locate the ''Extensions'' section and select the type of bay that you want to use.

                                ​

                                New bays can be added at a 90° angle, linear or in parallel.

                                Join our mailing list and stay up to date with our latest designs,

                                stories and all things MOEBE.

                                Subscribe

                                by subscribing you accept our privacy policy. You may withdraw your consent or manage your preferences at any time by clicking the unsubscribe link at the bottom of any of our marketing emails, or by emailing us at marketing@moebe.dk

                                Join our mailing list and stay up to date with our latest designs,

                                stories and all things MOEBE.

                                Subscribe

                                by subscribing you accept our privacy policy. You may withdraw your consent or manage your preferences at any time by clicking the unsubscribe link at the bottom of any of our marketing emails, or by emailing us at marketing@moebe.dk

                                We know,

                                you've just arrived.

                                We'd still love to hear your first impressions

                                give feedback